Experts Teach You How To Maintain Your Sports Shoes.

　　 clean

　　 Artificial leather surface :

The cleaning of artificial leather is relatively simple. As long as you clean the leather with wet cloth, wipe it immediately with a dry cloth. Avoid using the shoe polish oil for a long time to wipe the vamp, which will cause small cracks in the upper leather cortex.

Abrasive surface (anti fur surface):

This material's shoe upper is clean. It only needs a clean and dry toothbrush to brush on the leather surface in one direction. To ensure the life of the shoe, please try to avoid touching the upper with water and oil.

　　 Leather upper :

This kind of leather cleaning is the easiest. With this special shoe with no water absorption, we can find a damp cloth and wipe it with dry cloth.

　　 Special fabric leather surface :

The cleaning method of this material is to clean the upper part of the shoe with a small toothbrush and clean water, then clean it with a small toothbrush and clean it with a dry cloth. I would like to remind you not to use brushes and water to brush the vamp directly, and try to avoid using shoe polish to maintain uppers, which will reduce the life of shoes themselves.

　　 maintain

You should first ensure that the shoes are dry inside, and you can find some paper as stuffing to plug into the inside of the shoes, and stretch the leather surface of the shoes to stretch and smooth, but do not need too much paper. Next, find a small package of preservatives on the shoes, wrap the shoes with special shoes, and blow the shoes and shoes to the best place with the blower at 5-10 cm away from the shoes. Remind everybody to blow the air of the shoes and the air inside the shoes to ensure the tightness of the shoes. Finally, place your shoes in a ventilated and dry place, and avoid being irradiated with strong light.

First, when shoes are dirty, wash them with water and gently scrub them with water, then rinse them with clean water and place them in a cool, ventilated, dry place to avoid direct sunlight and exposure. Do not use heating or open fire to avoid aging, glue, fade and serious deformation. The excessive direct sunlight, and the improper nursing methods such as the heat of the blower will reduce the service life of the shoes. When it is washed, it can not be soaked for a long time. The general soaking time should not exceed 20 minutes. Real leather shoes can not be soaked in water.

Two, if stored for a long time, shoes should be cleaned first, dried and placed in a cool and ventilated place, so that shoes have enough time to blow dry, so as to avoid mildew. Real leather shoes should be supported by paper balls or shoes, so as to avoid serious deformation. Turn the toe ends towards the wall and dry them at the ventilating room at normal temperature, so that the water can be prevented from soaking into the foam materials at the bottom. (because the foaming materials are not easy to dry, it is recommended not to put the wet shoes flat. )

Three, in the process of wearing or brushing, do not use excellent brush or force too much, nor can you use fingernails or sharp tools to pick out the edges and corners of these printed patterns. After wearing for a period of time, there may be some small cracks (especially the tortuous parts) on the surface of some patterns, which are all normal.

Four, every day athletes or regular sports enthusiasts, it is best to prepare more than two pairs of sneakers for replacement; the nylon mesh fabric and artificial tanning leather on running shoes are relatively easy to maintain, and can be washed by sailors. It is best not to wash with washing machines or soak in water. Separate shoes and shoelaces from neutral soap / detergent. When you wash your shoes, remove the insoles, gently brush them with soft brush, and rinse them at last.

Five, in order to enable you to achieve a satisfactory dress effect, please treat your shoes fairly. Remember not to wear general jogging shoes or walking shoes for vigorous sports such as football and basketball. At the same time, no sport shoes can contact with sharp weapons.

One: the leather surface of a shoe is wet with cotton cloth, after drying, wipe it!

Two: the mesh surface and the mesh surface are mostly PV nets. They can use old toothbrushes and water, and wipe them from the inside. For example, the net surface is in front of the shoes, so the shoes should be brushed in the direction of the shoe toe, so the dirty things will not be left on the shoes too much!

After finishing all the tests, remember not to be exposed to the sun directly, which will turn white shoes yellow.

The right way is to put the shoes that are well tested in a cool and airy place in your home. If there is a little sunshine in the ventilation area, you can rely on the tissue, all wet and put on the upper surface (that is to cover all the shoes), so that no white shoes will turn yellow.