Plate Making Method Of Skew Cut Dress

2010/2/9 18:55:00 180

Skew cut dress can be said to be the most difficult item in skew cut clothing, so the difficulty is not expressed in the process of plate making, but in the process of correcting the sample, the correction of the sample should be adjusted to the standard stand or the human body.

Having understood the principle of oblique cutting, we can learn the most difficult oblique cut dress. The so-called difficulty is not in the process of plate making, but in the process of correcting the sample, the amendment of the clothes should be adjusted to the standard stand or the human body.

连衣裙制版的注意事项：先要画出臀围线以上的衣片，斜线以45°倾斜，斜线起点的位置要偏离侧缝点5cm左右(此时侧缝线不论是从造型还是功能上都是最佳的状态，当然也可以根据造型自行设计其位置)，衣片原有的省道和侧缝收量都转入到斜线侧缝和斜省中，转移时需先经过腰围线与斜线的交点做斜线的垂直线，量的大小以所转省的大小为准(具体省道转移的部位请参看图)，省道的长度上口以到胸围线为准，下口的长度一般超过臀围线3cm左右（这些也并非定数，完全可根据省量的大小或款式造型进行变化），省道的位置位于衣片宽度1/2处的斜线上，裙侧裙摆的造型变化的方法与前面六片裙所讲的变化相同，这里就不在举例说明。